العودة إلى المدونة
أدلة إرشادية 2026-11-20 ACUITY Instruments: Performance Automotive Products 0 مشاهدة

Paddock Banner Installation for Track Days

Paddock Banner Installation for Track Days

Learn how to set up your ACUITY Paddock Banner for track days, car meets, or garage display. Step-by-step hanging tips and care instructions included.

What You Need to Know Before Hanging Your Banner

The ACUITY Paddock Banner is designed to add style to your paddock, shop, garage, or man cave. At 475mm (18.7in) tall by 1620mm (63.7in) wide, it's a substantial piece that stands out at track days or car meets. Before you start, keep in mind that the banner is intended for indoor use only and should not be exposed to prolonged direct sunlight, as this may cause fading.

Paddock Banner Specs at a Glance

  • Paddock Banner: Dimensions: 475mm (18.7in) tall by 1620mm (63.7in) wide This size works well on garage walls, pit area partitions, or above a workbench. Measure your space to ensure a good fit.
    Paddock Banner
    Paddock Banner
  • Paddock Banner: Polyester construction with hemmed edges and 3 reinforced grommets along the top and bottom edge The grommets provide multiple hanging points, allowing you to secure the banner evenly and prevent sagging.
  • Paddock Banner: Single-side printed and supplied rolled for minimal wrinkles The banner arrives rolled in a tube to reduce creases. If wrinkles appear, they can be removed safely with a handheld clothing steamer.

Step-by-Step Hanging Guide

Follow these steps to set up your Paddock Banner at the track or in your garage.

  • Choose your location: Select an indoor or shaded area. The banner is not meant for prolonged outdoor use in direct sunlight. A garage wall, pit area partition, or canopy sidewall works well.
  • Unroll and flatten the banner: Remove the banner from the reinforced tube and unroll it on a clean, flat surface. If centerline folds are visible, let it sit flat for a few hours. For stubborn wrinkles, use a handheld clothing steamer on a low setting—do not iron directly.
  • Attach mounting hardware (not included): You will need hooks, nails, or zip ties that fit through the 3 top grommets. For a garage wall, small hooks or push pins work. For a track canopy, zip ties or carabiners are quick and secure.
  • Hang the banner using the top grommets: Insert your chosen hardware through each of the 3 top grommets. Space the mounting points evenly to distribute weight and prevent the banner from sagging in the middle.
  • Optional: secure the bottom grommets: If the banner is in a breezy area (like an open-sided canopy), use the 3 bottom grommets to tie it down or add light weights. This keeps the banner from flapping or curling.
  • Check alignment and tension: Step back and ensure the banner hangs straight. Adjust the mounting points if needed. The hemmed edges help the banner keep its shape.

Caring for Your Banner

To keep your banner looking fresh, hand wash and hang dry only. Do not machine wash or dry. Avoid prolonged exposure to direct sunlight, as this may accelerate fading. When not in use, roll the banner loosely (print side out) and store it in a cool, dry place.

مقالات ذات صلة

Customer Service
الرئيسية
المنتجات
السلة
الملف الشخصي