What worn stock shifter base bushings feel like
If your manual Civic or Integra still shifts through the gears but the knob feels vague or spongy, the base bushings are a likely contributor. The OEM base bushings on most Hondas and Acuras are made from highly compliant rubber. Thanks to leverage, that small amount of compliance translates into a very noticeable spongy feeling in the shift knob during shifts.
This is a feel diagnosis, not a leak or breakage diagnosis. The 1914 kit is designed to reduce compliance by replacing the OEM rubber bushings with solid aluminum, which makes the shift more decisive even with a stock shifter.
Symptoms that point to the base bushings
- Spongy knob during shifts: The knob moves through its travel but feels rubbery or delayed rather than direct, consistent with the compliance the OEM rubber bushings add.
- Vague engagement feel with a stock shifter: The 1914 bushings are intended to sharpen feel even when the rest of the shifter is unchanged, so a stock setup can still benefit.
- Leverage amplifies small compliance: The supplied description notes that leverage makes the small amount of rubber compliance feel much larger at the knob.
Confirm your car and shifter before ordering
The 1914 Shifter Base Bushings are intended for use with the OEM shifters for the 10th Gen Civic, 11th Gen Civic, and 5th Gen Integra. They are not compatible with ACUiTY’s 10th Gen Civic Shifter (SKU 1892) or ACUiTY’s 11th Gen Civic/5th Gen Integra Shifters (SKU 1981-LHD or SKU 1981-RHD).
Listed fitment includes 2017–2021 Honda Civic Si and Type R (10th Gen), 2016–2021 Honda Civic Sport (10th Gen, MT only), 2022+ Honda Civic and Civic Si (11th Gen, MT only), 2023+ Honda Civic Type R (11th Gen), 2023+ Acura Integra A-Spec (5th Gen), and 2024+ Acura Integra Type S (5th Gen). If your car or shifter is not on that list, the supplied information does not confirm compatibility.
What the 1914 kit replaces
- 1914 Shifter Base Bushings: Reduces compliance by replacing the OEM rubber bushings with solid aluminum. This is the core fix for the spongy feel described above.

1914 Shifter Base Bushings - 1914 Shifter Base Bushings: Includes (4) upper bushings, (4) lower bushings, and (4) class 12.9 M6 mounting bolts. You get the full set of bushings and matching mounting hardware in one kit.
- 1914 Shifter Base Bushings: Bushings are made from rigid 6061-T651 aluminum with a purple Type 2 anodized finish and laser-etched logos. The material is the reason the kit removes the rubber compliance rather than adding another flexible layer.
What this diagnosis does not cover
The supplied information focuses on base bushing compliance and fitment. It does not provide a procedure for inspecting other shifter components, nor does it list torque specifications or step-by-step installation instructions. For installation, ACUiTY provides an Install Guide and links to install guide PDFs and videos for this product and many others.
If your symptom persists after confirming the base bushings are the source, the supplied records do not identify additional causes. Treat this as a starting point for diagnosis, not a complete repair manual.


