What the Stage 3 Shift Kit Includes
The Stage 3 Shift Kit for the 11th Gen Civic and 5th Gen Integra combines a fully adjustable short shifter with ACUITY's industry-leading shifter cable bushings. The shifter features an incredibly rigid and lightweight frame, with a wide range of throw, gate spacing, and height adjustments, plus a stiffer centering spring. The kit also includes the cable bushings to tighten up the shift feel from the transmission side. Together, these components deliver a precise, race-inspired shift feel that mirrors the setup used on Team Honda Research West FL5 race cars and ACUITY's own time attack cars.
Installation Overview and Key Steps
Installation involves removing the factory shifter assembly, installing the new shifter and cable bushings, and adjusting the shifter to your preference. The following steps outline the general process, but always refer to the manufacturer's instructions for your specific vehicle.
- 1. Prepare the vehicle and gather tools: Park on a level surface, disconnect the battery, and remove the center console to access the shifter assembly. Have a set of basic hand tools (sockets, wrenches, trim removal tools) ready. ACUITY recommends using interior panel removal tools to avoid damaging trim clips.
- 2. Remove the factory shifter and cables: Unbolt the factory shifter from the transmission tunnel and disconnect the shift cables. Remove the factory cable bushings from the transmission end. Keep all hardware for potential reuse.
- 3. Install the ACUITY cable bushings: Replace the factory cable bushings with the included ACUITY bushings at the transmission end. These reduce slop and provide a more direct connection.
- 4. Mount the new shifter: Position the ACUITY shifter in the tunnel and secure it using the provided hardware. Reconnect the shift cables to the shifter. Ensure the cables are properly seated and not binding.
- 5. Adjust throw, gate spacing, and height: The shifter offers huge ranges of adjustment. Set the throw (how far the lever moves between gears), gate spacing (distance between shift gates), and lever height to your preference. Start with a moderate setting and fine-tune after a test drive.
- 6. Reassemble the interior and test: Reinstall the center console, reconnect the battery, and start the engine. Cycle through all gears with the engine off, then take a careful test drive. Listen for any unusual noises and verify smooth engagement.
Compatibility and Fitment Notes
- Stage 3 Shift Kit for the 11th Gen Civic & 5th Gen Integra: The Left-Hand-Drive shifter (SKU 1981-LHD) works with all left-hand-drive manual versions of the 11th Gen Civic including the base, Sport, Sport Touring, Si, and Type R, as well as all manual versions of the 5th Gen Integra including the A-Spec and Type S. Ensures you select the correct shifter for your vehicle's drive configuration and trim level.

Stage 3 Shift Kit for the 11th Gen Civic & 5th Gen Integra - Stage 3 Shift Kit for the 11th Gen Civic & 5th Gen Integra: The Right-Hand-Drive shifter (SKU 1981-RHD) works with all right-hand-drive manual versions of the 11th Gen Civic Type R and the Civic RS. Important for RHD markets to verify fitment before purchase.
- Stage 3 Shift Kit for the 11th Gen Civic & 5th Gen Integra: POCO shift boot collars are only compatible with POCO shift knobs. If selecting an ESCO knob, use one of the "Shift Boot Collar Upgrade" options instead. Prevents compatibility issues when customizing the shift knob and boot collar.
Optional Upgrades and Customization
After installing the Stage 3 Shift Kit, you can further tailor the feel and appearance. ACUITY offers optional ESCO or POCO shift knobs and shift boot collars to enhance the look and feel. For the centering spring, you have choices: the standard spring is included, but you can swap to the Low-Preload (1981-S01) for a gentler centering force or the High-Preload (1981-S03) for a snappier return. These allow you to dial in the shift action to match your driving style.


