Confirm Your Knob and Vehicle First
Before you buy or install the satin red shift boot collar, verify two things: your shift knob and your vehicle.
This collar is compatible with all ACUiTY POCO and POCO-Insulated shift knobs. It is not compatible with any other shift knobs or boot collar accessories. If you have a different brand or model, this part will not fit.
For vehicle fitment, the supplied information lists specific Hondas and Acuras that are confirmed to work with POCO shift knobs. However, note that POCO shift knobs will not fit some vehicles without modification to the shifter—specifically, two small steel bumps must be filed off the shift lever to clear the collar portion of the POCO. Always check the full vehicle list in the product description to ensure your car is included. This collar itself does not change vehicle compatibility; it is designed to work with POCO knobs on those confirmed applications.
Key Specs for the Satin Red Collar
- Satin Red Aluminum Shift Boot Collar for POCO Shift Knobs: 6061 Aluminum construction with satin red anodized finish and laser etching Durable material and finish that resists wear while adding a custom look.

Satin Red Aluminum Shift Boot Collar for POCO Shift Knobs - Satin Red Aluminum Shift Boot Collar for POCO Shift Knobs: Includes 3x lay-flat zip ties for installation These ties are used to secure the collar to your shift boot.
- Satin Red Aluminum Shift Boot Collar for POCO Shift Knobs: SKU: 1925-CLR-RD Use this SKU to reference the correct install guide.
How to Install the Collar
ACUiTY provides install guides for SKU 1925, which you should reference before starting. The steps below outline the general process using the included zip ties. Always follow the official guide for detailed instructions.
- 1. Prepare your shift boot: Ensure the shift boot is clean and dry. If you are replacing an existing collar, remove it first.
- 2. Position the collar: Slide the satin red collar over the top of the shift boot, aligning it with the boot's edge. The collar should sit flush against the boot.
- 3. Secure with zip ties: Use the three included lay-flat zip ties to affix the collar to the shift boot. Thread each tie through the collar's slots and around the boot, then tighten evenly. Trim excess tie ends if needed.
- 4. Install your POCO knob: Thread your POCO or POCO-Insulated shift knob onto the shifter. The collar should sit below the knob, covering the top of the boot.
- 5. Check fitment: Ensure the collar is secure and does not interfere with shifting. If your vehicle required filing the steel bumps on the shifter, confirm the collar clears them properly.
Caring for the Satin Red Finish
The satin red anodized finish is durable, but you can prolong its appearance with simple care. Clean the collar with a soft, damp cloth and mild soap. Avoid abrasive cleaners, scouring pads, or harsh chemicals that could dull the finish or remove the laser etching. Since the collar is aluminum, it can be polished with a non-abrasive metal polish if desired, but test on a small area first. Regular cleaning prevents dirt and oils from accumulating, keeping the satin red look vibrant.
When to Reference the Install Guide
The supplied information directs you to ACUiTY's install guide PDFs and videos for SKU 1925. If you encounter any resistance during installation or are unsure about the zip tie placement, consult the guide. It provides visual and step-by-step instructions that can help you avoid mistakes. Additionally, if your vehicle is listed as requiring modification to the shifter (filing the steel bumps), the guide may include specific notes for that procedure.


