Short Throw Adapter for 11th Gen Civic & 5th Gen Integra
By ACUITY Instruments: Performance Automotive Products | Published: 2026-10-29
Category: Buying Guides
Upgrade your 11th Gen Civic or 5th Gen Integra with a short throw adapter that reduces shift throw by 20% for a sportier, more precise feel. Learn the key decision rules before you buy.
Quick answer
If you want a tighter, more mechanical shift feel without replacing the entire shifter assembly, the ACUITY Short Throw Adapter for 11th Gen Civic and 5th Gen Integra is a cost-effective upgrade that reduces throw by about 20% and raises the shifter 7.5 mm for a sportier position.
What the adapter changes
The adapter works with your factory shifter, not against it. It replaces the stock shift arm with a precision-machined 300 series stainless steel piece that changes the leverage ratio. The result is a shorter, more direct gate pattern and a stiffer feel because the OEM rubber bushings are bypassed.
The height trade-off
Included spacers raise the shift lever by 7.5 mm (0.3 in). For most drivers this puts the knob in a more natural reach, especially with aftermarket seats. If you prefer a stock-height shifter or have limited clearance with a particular shift boot, you can leave the spacers out—but then you lose the raised position benefit.
Decision rules for the short throw adapter
- Vehicle compatibility: The adapter fits the 11th Gen Civic (including Si and Type R) and the 5th Gen Integra. If your car is not one of these platforms, this part will not work. Confirm your model year and trim before ordering.
- Installation effort: You will need to remove the center console, disconnect the shift cables, and swap the shift arm. The unique clamping nut design helps secure the adapter, but basic hand tools and about 45–60 minutes are required. Plan for a weekend afternoon if you are new to shifter work.
- Shift feel expectation: Expect a 20% reduction in throw and a stiffer, more positive engagement. The OEM rubber bushings are replaced by the adapter's solid construction, so noise and vibration will increase slightly. If you want a quieter cabin, consider pairing with a weighted shift knob to dampen vibration.
- Budget vs. full replacement: At roughly half the price of a complete short shifter, the adapter is a budget-friendly upgrade. However, it does not change the shifter's pivot height or cable ratio beyond the 20% reduction. Choose the adapter if you want a noticeable improvement without replacing the whole shifter base.
Product facts
- Short Throw Adapter for the 11th Gen Civic & 5th Gen Integra: Reduces shift throw of OEM shifter by approximately 20% You get noticeably shorter gates without the cost or complexity of a full short shifter assembly.
Short Throw Adapter for the 11th Gen Civic & 5th Gen Integra - Short Throw Adapter for the 11th Gen Civic & 5th Gen Integra: Spacers included to raise shifter 7.5mm (0.3in) The raised height puts the shift knob closer to your hand, improving ergonomics for a more natural reach.
Who should buy this adapter
Best for
- Drivers of 11th Gen Civic or 5th Gen Integra who want a sportier shift without replacing the entire shifter
- Enthusiasts on a budget who still want a meaningful reduction in throw and a stiffer feel
Not for
- Owners of other Honda/Acura models—the adapter is platform-specific
- Drivers who want adjustable throw or height beyond the fixed 20% reduction and 7.5 mm rise
