Terug naar blog
Handleidingen 2026-11-18 ACUITY Instruments: Performance Automotive Products 0 weergaven

8th Gen Civic Stage 1 Shift Kit (2007-2008): Install Walkthrough

8th Gen Civic Stage 1 Shift Kit (2007-2008): Install Walkthrough

A practical walkthrough for installing the Stage 1 Shift Kit on your 2007-2008 Civic, with the base-model spring warning you need to know before you order.

What the Stage 1 kit changes and why it matters

The 8th Gen Civic Stage 1 Shift Kit (2007-2008) is designed for tuners who want a decisive shift feel without a huge spend. It pairs compliance-reducing shifter base bushings with spherical shifter cable bushings, so the shifter feels more direct and less rubbery.

Before you start, confirm your car is a 2007 or 2008 Civic. The kit fits both Si and base models, but the optional transmission select springs are Si-only—more on that below.

Step-by-step install for the 2007-2008 Civic

These steps cover the core kit contents. Always work on a cool engine and use proper safety gear.

  1. 1. Prep and access: Park on a level surface, set the parking brake, and disconnect the battery negative terminal. Remove the center console trim to expose the shifter base and cable ends.
  2. 2. Replace the shifter base bushings: Unbolt the shifter base and swap the stock rubber bushings for the supplied compliance-reducing bushings. Tighten the base bolts evenly to avoid binding.
  3. 3. Install the spherical cable bushings: Pop the stock cable ends off the transmission levers and press in the spherical bushings. Reattach the cables and check for full engagement through the gear range.
  4. 4. Optional: add transmission select springs (Si only): If you have an Si and want a stiffer, snappier centering action, install the upgraded springs now. Do not install these springs on a base model—they are not compatible.
  5. 5. Reassemble and test: Reinstall the console trim, reconnect the battery, and run the shifter through all gears with the engine off, then start the car and check operation at low speed.

Key product facts for your install

  • 8th Gen Civic Stage 1 Shift Kit (2007-2008): Kit includes compliance-reducing shifter base bushings and spherical shifter cable bushings. These are the two main components you'll install; knowing what's in the box helps you plan the job.
    8th Gen Civic Stage 1 Shift Kit (2007-2008)
    8th Gen Civic Stage 1 Shift Kit (2007-2008)
  • 8th Gen Civic Stage 1 Shift Kit (2007-2008): Compatible with both Si and base model 2007-2008 Civics. Confirms the kit fits your car regardless of trim, but see the spring warning below.
  • 8th Gen Civic Stage 1 Shift Kit (2007-2008): Optional transmission select springs are compatible with the Si only. If you drive a base model, skip the springs or you'll have parts that don't fit.

The base-model warning you must not ignore

ACUITY explicitly states: "Do not purchase the optional springs if you are planning to install this kit on a base model." The springs are designed for the Si's transmission and will not work on the base car. If you're unsure which trim you have, check your VIN or owner's manual before ordering.

This is the most common fitment mistake with this kit, so double-check before you add the springs to your cart.

What to expect after the install

With the base and cable bushings in place, you should notice a more direct, mechanical shift feel—less slop and a more positive engagement. If you added the Si springs, centering will feel stiffer and snappier.

The kit doesn't include a shift knob or boot collar, but ACUITY offers ESCO and POCO knobs and shift boot collars separately if you want to customize the look and feel.

Gerelateerde artikelen

Customer Service
Home
Producten
Winkelwagen
Profiel