Start with the cable, not the shifter
If your Honda or Acura shifter feels vague, notchy, or slow to engage, the rubber bushings at the shift cable ends are a common culprit. The 1917 Shifter Cable Bushing Upgrade from ACUITY replaces those compliant OEM pieces with a spherical acetal and aluminum design. This guide covers which vehicles it fits, how to recognize worn bushings, and the install basics you need before you begin.
What the 1917 kit changes
- 1917 SHIFTER CABLE BUSHING UPGRADE (for various 2006 and earlier applications): O-Ring Loaded Design Wear-Compensates; Spherical Design decreases resistance in shifts; Solid Construction provides a stiffer feel than the OEM Rubber. These three features address the main complaints drivers have with the factory rubber bushings: slop, binding, and a disconnected feel.

1917 SHIFTER CABLE BUSHING UPGRADE (for various 2006 and earlier applications) - 1917 SHIFTER CABLE BUSHING UPGRADE (for various 2006 and earlier applications): Includes all stainless steel hardware to avoid corrosion; bushings are over 20% lighter than their OEM counterparts, weighing in at only 48 grams (with hardware). Corrosion-resistant hardware is useful on older cars, and the lighter weight is a bonus for a small part.
Fitment: which cars the 1917 bushing upgrade covers
The 1917 kit is designed for manual-transmission applications only. The supplied fitment list includes:
- 2002–2005 HONDA Civic Si: Fits manual transmission models.
- 2003–2007 HONDA Accord (7th Gen, all MT): Fits all 7th-generation manual-transmission Accords.
- 2003–2008 HONDA Element (all MT): Fits all manual-transmission Elements in this range.
- 2004–2008 ACURA TSX: Fits manual-transmission TSX models.
- 2006 HONDA Civic Si: Fits the 2006 Civic Si with manual transmission.
- 2001–2005 HONDA Civic Coupe (EM) and Sedan (ES) (MT Only): Fits manual-transmission EM/ES Civics.
- 2002–2006 ACURA RSX (MT Only): Fits manual-transmission RSX models.
- 2002–2006 ACURA RSX-S (Will NOT fit most DC5R OE shift cables, contact us for more information): Important exception: if your RSX-S has DC5R OE shift cables, this kit may not fit. Verify before ordering.
- 2006 HONDA Civic (MT Only): Fits the 2006 Civic with manual transmission.
Do you have a worn shifter cable bushing?
The supplied product description explains that Honda and Acura intentionally use very compliant rubber shifter cable bushings to give the car a tame feel. Over time, that compliance can disconnect you from the transmission during shifts, leading to missed shifts or slow shifting, especially in racing conditions. If you notice a vague or rubbery shifter feel, difficulty finding gears at high RPM, or a shifter that doesn’t engage with a solid click, the bushings are a likely cause. Inspecting the cable ends for cracked or missing rubber is the first step.
What’s in the box
- 1917 SHIFTER CABLE BUSHING UPGRADE (for various 2006 and earlier applications): Contents: (1) Spherical gear change cable bushing, (1) Solid gate change cable bushing, hardware bag including (1) single turn retaining ring, (1) 2-turn retaining ring, and (2) cotter pins. Knowing the contents helps you confirm you have all parts before starting the install.
- 1917 SHIFTER CABLE BUSHING UPGRADE (for various 2006 and earlier applications): Each bushing kit is laser etched with a unique serial number and includes stainless steel hardware to help prevent long-term corrosion. The serial number is a mark of authenticity, and the stainless hardware is a practical upgrade for older vehicles.
Install basics: what to expect and how to prepare
ACUITY provides an install guide and install tips for this product. The supplied evidence includes a hardware bag with retaining rings and cotter pins, and a note about a guide for removing the stock rubber bushings and installing the retaining rings. The exact steps are in ACUITY’s install guide PDFs and videos, which you should consult before starting. The following checkpoints are supported by the supplied information.
- 1. Confirm your vehicle and transmission: Check the fitment list above. This kit is for manual-transmission cars only. RSX-S owners with DC5R OE shift cables should contact ACUITY before ordering.
- 2. Gather the included hardware: Verify you have both bushings (spherical gear change and solid gate change), the single-turn retaining ring, the 2-turn retaining ring, and two cotter pins.
- 3. Access the shift cable ends: The bushings are located at the transmission end of the shifter cables. The supplied information does not detail the exact procedure for accessing them; refer to the ACUITY install guide for your specific model.
- 4. Remove the stock rubber bushings: ACUITY has a quick guide with tips on removing the stock rubber bushings properly. Follow that guide to avoid damaging the cable or surrounding components.
- 5. Install the new bushings and retaining rings: The kit includes a single-turn and a 2-turn retaining ring, plus cotter pins. The install guide includes tips on retaining ring installation. Use the correct ring for each position as shown in the guide.
- 6. Check shifter operation: After installation, verify that the shifter moves smoothly through all gears without binding. The spherical bearing design is intended to minimize binding, but proper installation is essential.
What the supplied information doesn’t cover
The supplied evidence does not include a step-by-step procedure for accessing the shift cables on each vehicle, nor does it specify torque values or special tools. For those details, consult the ACUITY install guide PDFs and videos linked from the product page. If you are unsure about any step, have a qualified technician perform the install.


