Back to Blog
How-to Guides 2026-11-17 ACUITY Instruments: Performance Automotive Products 0 views

Satin Purple Aluminum Shift Boot Collar: Upgrade and Install Guide

Satin Purple Aluminum Shift Boot Collar: Upgrade and Install Guide

Replace your sagging shift boot and broken plastic collar with a satin purple aluminum upgrade. Learn compatibility, knob fit, and installation steps.

Why Replace Your Plastic Shift Boot Collar?

The factory plastic ring that holds your shift boot in place often breaks or sags over time, especially after repeated removal of the shift knob. The ACUITY Shift Boot Collar Upgrade (SKU 1924-K6) replaces that plastic ring with a 6061 aluminum collar that features a satin purple anodized finish and an integral retaining feature that lets you pop the boot collar on and off many times without breaking it.

This upgrade is designed for manual transmission Honda and Acura vehicles listed in the fitment chart below. It allows use of virtually any M10x1.5 shift knob while maintaining a clean, finished look between the shift boot and knob.

Key Specs for the Satin Purple Collar

  • Shift Boot Collar Upgrade (Satin Purple Aluminum Finish): Collar is 6061 aluminum with satin purple anodized finish. Durable aluminum construction resists cracking and provides a custom look.
    Shift Boot Collar Upgrade (Satin Purple Aluminum Finish)
    Shift Boot Collar Upgrade (Satin Purple Aluminum Finish)
  • Shift Boot Collar Upgrade (Satin Purple Aluminum Finish): The boot collar is reversible and can be flipped to match your knob's base diameter, whether it be a traditional narrow-bottomed knob (with a 22mm lower diameter) or the newer style wide-bottomed knobs (with a 28mm lower diameter). Ensures a proper fit with a wide range of aftermarket and factory shift knobs.
  • Shift Boot Collar Upgrade (Satin Purple Aluminum Finish): Includes (1) Flat-Bottomed Knob Binding Nut and (1) Boss-Bottomed Knob Binding Nut, both turned and milled from stainless steel with flats for a 12mm open-ended wrench. Provides the hardware needed to secure your shift knob without additional purchases.

Check Your Vehicle and Shift Knob Compatibility

Before ordering, confirm your vehicle is listed in the fitment chart below. This collar is designed for manual transmission only. Also verify that your shift knob uses M10x1.5 threads; the kit is designed to work with virtually any M10x1.5 knob.

The kit includes two binding nuts: one for flat-bottomed knobs and one for boss-bottomed knobs (like modern Civic Type R and Honda Factory Performance designs). If your knob has a narrow base (22mm lower diameter), the collar can be flipped to the narrow side; for wide-bottomed knobs (28mm lower diameter), use the wide side.

Confirmed Fitment for the Shift Boot Collar Upgrade

  • Shift Boot Collar Upgrade (Satin Purple Aluminum Finish): 1999-2009 HONDA S2000 (MT only); 2002-2005 HONDA Civic (7th Gen, all trims, MT only); 2002-2006 ACURA RSX-S and Base (MT only); 2002-2006 HONDA CR-V (2nd Gen, MT only); 2003-2007 HONDA Accord (7th Gen, MT only); 2003-2011 HONDA Element (MT only); 2004-2008 ACURA TSX (1st Gen, MT only); 2006-2011 HONDA Civic (8th Gen, all trims, MT only); 2008-2012 HONDA Accord (8th Gen, all trims, MT only); 2009-2014 ACURA TSX (2nd Gen, MT only); 2012-2015 HONDA Civic Si (9th Gen, all trims, MT only); 2016-2021 HONDA Civic (10th Gen, MT only); 2018-2022 HONDA Accord (10th Gen, MT only); 2022+ Honda Civic (11th Gen, MT only); 2023+ HONDA Civic Type R (11th Gen, MT Only); 2023+ ACURA Integra A-Spec (5th Gen, MT Only); 2024+ ACURA Integra Type S (5th Gen, MT Only). This list represents vehicles where ACUITY has confirmed fitment; also fits most Honda M10x1.5 shifters.

How to Install the Shift Boot Collar Upgrade

The following steps are based on the product description and general installation logic. For detailed instructions and vehicle-specific tips, always refer to the official ACUITY install guide PDFs and videos available on their website.

  1. Remove the shift knob and old collar: Unscrew your shift knob and carefully remove the OEM plastic boot ring. If the ring is broken, take care not to drop pieces into the shifter area.
  2. Choose the correct binding nut and collar orientation: Select the flat-bottomed or boss-bottomed nut to match your knob. Flip the collar so the side matching your knob's base diameter (22mm or 28mm) faces up.
  3. Attach the boot to the collar: Use the supplied lay-flat cable ties to secure the shift boot to the collar. The collar's integral retaining feature allows you to pop it on and off the shifter without damaging it.
  4. Install the collar and binding nut: Place the collar over the shifter, then thread the binding nut onto the shifter. Use a 12mm open-ended wrench to tighten the nut, which will hold the collar and boot in place.
  5. Reinstall your shift knob: Screw your M10x1.5 shift knob onto the shifter. The binding nut can also be used to lock the knob in position if desired.

What to Expect After Installation

Once installed, the satin purple aluminum collar provides a clean transition between the shift boot and knob, eliminating sagging and mismatched diameters. The reversible design ensures compatibility with a wide range of knob styles, and the stainless steel binding nuts offer secure, durable hardware.

Remember that this product is designed for manual transmission vehicles only. If your vehicle is not listed in the confirmed fitment chart, it may still fit if your shifter uses M10x1.5 threads, but ACUITY only guarantees fitment for the listed applications.

Related Articles

Customer Service
Home
Products
Cart
Profile