Back to Blog
How-to Guides 2026-11-17 ACUITY Instruments: Performance Automotive Products 0 views

POCO-Ti Burnt Titanium Shift Knob: M10x1.5 Fitment FAQ

POCO-Ti Burnt Titanium Shift Knob: M10x1.5 Fitment FAQ

Will the POCO-Ti fit your manual Honda or Acura? Answers on M10x1.5 thread compatibility, the 3–4mm countersink, shift boot collar install, and caring for the burnt titanium finish.

POCO-Ti Fitment: Which Cars Does It Fit?

Which vehicles are confirmed to fit the POCO-Ti?
The supplied fitment list includes many manual-transmission Honda and Acura models, such as 2002–2006 Acura RSX (including DC5 Integra), 2002–2006 Honda CR-V, 2003–2007 Honda Accord, 2004–2008 Acura TSX, 2006–2008 Honda Civic, 2009–2014 Honda Fit, 2012–2015 Honda Civic Si, 2016–2021 Honda Civic, 2018–2022 Honda Accord, 2022+ Honda Civic, 2023+ Acura Integra A-Spec, and 2024+ Acura Integra Type S. The list is not exhaustive here; always confirm your exact year, trim, and transmission before ordering.
Will the POCO-Ti fit my car if it is not on the confirmed list?
The supplied information does not confirm fitment for vehicles outside the listed applications. Some vehicles require modification: the notes say certain cars will not fit without filing two small steel bumps off the shift lever to clear the collar. Because the full list is not reproduced here, check the product page or install guide for your specific chassis before purchase.
Does the POCO-Ti fit automatic-transmission cars?
Every confirmed application in the supplied list specifies manual transmission (MT) only. The product is not confirmed for automatic or CVT models.

Thread Size and Installation Questions

What thread size does the POCO-Ti use?
The POCO-Ti is an M10x1.5 shift knob. Before ordering, verify your shift lever thread size — the supplied information does not include a thread-check procedure, so consult your vehicle's specifications or the ACUiTY install guide if you are unsure.
How low does the POCO-Ti sit compared to other knobs?
Most knobs sit around 25 mm (1 inch) or higher above the top of the shift lever. The POCO-Ti sits only 3–4 mm above the top of the lever, which typically reduces shift throw by 5–10% compared to non-countersunk knobs. The installed knob is positioned about 3 mm (0.12 in) taller than the threads on the shifter.
How does the shift boot collar attach?
The kit includes a detachable titanium boot collar in a burnt gold finish. The collar is affixed to the shift boot using the supplied low-profile cable ties (three are included). The knob threads down on the shift lever until it stops, then the collar clips into the knob to complete the installation.
What should I expect during installation?
The supplied information describes the sequence: attach the collar to the boot with a cable tie, thread the knob onto the lever until it stops, and clip the collar into the knob. For vehicle-specific steps, ACUiTY provides install guide PDFs and videos for this product; follow those rather than improvising.

POCO-Ti Specifications That Affect Fit and Feel

  • POCO-Ti Low Profile Shift Knob in Burnt Titanium Finish (M10x1.5): Titanium is 65% denser, has 95% lower thermal conductivity, and has 40% lower heat capacity than aluminum. These material properties make the knob more forgiving in harsh temperatures and give it a more weighted feel than an aluminum knob.
    POCO-Ti Low Profile Shift Knob in Burnt Titanium Finish (M10x1.5)
    POCO-Ti Low Profile Shift Knob in Burnt Titanium Finish (M10x1.5)
  • POCO-Ti Low Profile Shift Knob in Burnt Titanium Finish (M10x1.5): The POCO-Ti sits only 3–4 mm above the top of the shift lever, reducing shift throw by 5–10% compared to non-countersunk knobs. This low-profile design is the main functional difference from taller knobs, and it directly affects shift feel.
  • POCO-Ti Low Profile Shift Knob in Burnt Titanium Finish (M10x1.5): The kit includes (1) POCO-Ti Shift Knob in Burnt Titanium Finish, (1) Titanium Shift Boot Collar in Burnt Gold Titanium Finish, and (3) Lay-Flat Cable Ties. Knowing the contents helps you confirm you have everything needed for installation.

Caring for the Burnt Titanium Finish

How do I clean the burnt titanium finish?
Use a microfiber cloth and household rubbing alcohol to wipe the outer surfaces. This removes oil and dirt that can temporarily reduce the vibrancy of the burnt finish and restores its original appearance.
What should I avoid to prevent wear or scratches?
Avoid using the knob when your hands are excessively rough or have abrasive materials like sand or dirt on them, as this can prematurely wear the burnt finish. Also avoid use with rings or similar jewelry, which may scratch the finish.
Can the finish be repaired if it gets damaged?
The supplied information says ACUiTY may be able to refinish the knob at a lower cost than replacing it; contact ACUiTY for details. No other repair options are confirmed.

Related Articles

Customer Service
Home
Products
Cart
Profile